OVERVIEW

Time synchronization creates a platform for an entire system comprising wide range of applications to operate in synchronous with time.

The demand for improving the effectiveness of any system in place is met with time synchronization system deployed in the field. Troubleshooting is simplified by the application of time synchronization in the event of fault analysis.

SERTEL manufactures GNSS based Time Synchronization System which generates precise time stamp signals that synchronizes various network of electrical, computer, communications devices such as DCS, PLCs, LANs, Computer Buses, RTUs etc.

T-GPS-300-S09

Key Features:

  • Compact size & Easy usability
  • Multi Constellation Channel GNSS Receiver and minimum 12 Channel Continuous Tracking.
  • Equipped with high precision OCXO crystal for frequency maintaining micro second level accuracy.
  • Accuracy of 14 nano second with GNSS Signal.
  • LCD Display: 2×16 / 2×20 characters
  • Highly customizable Output configurable as per requirement.
  • Configured to work as Stand-Alone Time server.
  • Universal Power Supply.
  • Drives a number of Slave Clocks / Digital Clocks.
  • Provides time/ date stamping through Ethernet, Coaxial & Serial interfaces.
  • Low-cost maintenance with durable performance.
TECHNICAL SPECIFICATIONS 
GPS ANTENNA
ModelT-GPA-014-S15
Receiving FrequencyL1- 1575.42 MHz
L5- 1176 Mhz
Tracking code‘L’ Band CA code
Geodetic SystemWGS – 84
No. of Channels24 Channel / Parallel
TypeHelical
Axial Ratio<4 dB
Supply Voltage +5V DC (Internal)
GainOver 40 dB
Noise FigureLess than 0.5 dB
Operating Temp-40 °C to +85 °C
ConnectorBNC
Dimension80(h)x55(d) x 82(w) mm
MountingFixed (Roof mount)
IP67 (Ingress Protection
Rating)
GPS RECEIVER
ModelT-GPS-300-S09
InterfaceTTL (Normal High)
Input connectorBNC
Output RateEvery second
Power Supply90-260 V AC/DC A & B
Display2x16 / 2x20 LCD
TypeGPS: L1 C/A, L2C,
GLO: L1OF, L2OF,
GAL: E1B/C
BDS: B1I, B2I
184 Channel Parallel-tracking
receivers
FrequencyL1 & L2
Sensitivity (Acquisition)-148 dBm
Sensitivity (Tracking)-167 dBm
Design1U rack-mount bracket designed for 19 Inch Cabinets
Fabricated Heatsinks
ProtocolNMEA, Sertel Format, Serial String ASCII format.
ENVIRONMENT
Storage Temperature-40 to +85 °C
Operating Temperature-10 to+55 °C
Humidity0 – 95% RH, noncondensing
Power Drain45W

*Depends on Output configuration

Power Supplies1x or 2x Power Supplies High Voltage - AC/DC
90-370 VDC
80-260 VAC
Low Voltage - DC
24-60 VDC

*Feature Available only on Specific requests and suitable price points


Ingress ProtectionIP40
Configuration Software
PlatformHTTPS/SSL Browser-based
configuration
MECHANICAL SPECIFICATION
Dimensions1U(H) x 485(W) x 185(D) mm (Or)
2U(H) x 485(W) x 325(D) mm

*Size Depends on number of outputs

Mounting19” Rack
Weight2.5 KG
Oscillator Options

*Feature Available only on Specific requests and suitable price points


Disciplined OscillatorTBC*
RubidiumTBC*
VCTCXOTBC*
OCXOTBC*
INPUT
GNSS Antenna inputsL1Band GNSS, BNC [F]
ConfigurationSertel Time Management Suite for complete accessibility and configurability of server. Keypad for local configuration
L1Band GNSS, BNC [F]

*Feature Available only on Specific Requests and suitable price points

InputDC IRIG-B Input (BNC)
Antenna InputBNC 5V GNSS Input
Alarm Relay3-Pin Form-C NO/NC alarm relay
OUTPUT VARIANTS*
1PPSTTL, 50 Ω Impedance, BNC [F]
IRIG-BAM [B125], 50 Ω Impedance Sine
Wave, BNC [F]
TTL [PWM]
DCF77TTL, 50 Ω Impedance, BNC [F]
Pulse Outputs1 PPM/PPS/PPD/PPH/
Configurable
Display OutputsDifferential Pulse/ Serial/ IRIGB
Fiber Output
PPS | NTP | IRIGB TTL
ST Fiber 62.5/125 µm, ʎ 820 nm
Programmable OutputTTL or Frequency Output (1.544,
2.048, 10MHz, Sine or Square) (BNC)
TTL or AM IRIG-B Output (BNC)
TTL Input/Output (BNC)
ST Fiber (62.5/125 µm) multimode
HV MOSFET 300V 1A (2-pin)
Modbus RS485/TCPIP
IEC60870-103/104
Ethernet Output RJ45 - Time Protocols NTP, PTP
Ethernet ConnectionsRJ45 1GbE/Fast Ethernet
SFP 1GbE`/Fast Ethernet

*Feature Available only on Specific Requests and suitable price points

NETWORK TIME SERVER OPTION*
IEEE 1588v2 (PTP)P2P/E2E delay
1-Step/2-Step delay
C37.238:2011 Power Profile
C37.238:2017 Power Profile
ITU G.8265.1 Telecom Profile
ITU G.8275.1 Telecom Profile
IEEE 61850-9-3 Power Utility
Profile
NTP/SNTPStratum 1 NTP & SNTP Time server
Multicast & Broadcast capability
SNMPV1, V2C & V3 support can be
independently enabled
Configurable V1, V2C community
names & security groups
Fully monitored via SNMP;
Protocols supportedARP, UDP, ICMP, DHCP, SNMP,
HTTPS, IPv4,IPv6
CLOCK ACCURACY TO UTC
TTL/Fiber:< 100 ns
PTP Time Stamp< 100 ns
SecurityUser-Defined Access Control Lists
(ACL)
PRPIEC 62439-3 (2016)
Fast failover slave
Supports up to two PRP pairs PTP (IEEE 1588v2) Default & Power Profiles
AM IRIG-B< 100 ns
1 PPS< 100 ns
NTP Timestamp at
Server Source
< 1 μs (At client End Depends on Network Architecture for more accuracy)
Notifications

*Feature Available only on Specific Requests and suitable price points


SNMP trap generation V1, V2C
& V3
SNMPv3 traps can be authenticated
Syslog (RFC-3164 & 5424 verities)
TEST AND STANDARDS
Dry Heat Test IEC 60068-2-2
Cold TestIEC 60068-2-1
Damp Heat (Steady State) TestIEC 60068-2-3
Sinusoidal Vibration TestIEC 60068-2-6
Dielectric Strength TestIEC 60255-5-0
Pulse Magnetic Field TestIEC 61000-4-9,2016
Radiated RF Power DisturbanceCISPR 14-1,2009
Voltage Fluctuation and Flicker
Emission Test
IEC 61000-3-3,2013
Harmonics, Inter Harmonics and
Low Frequency Immunity Test
IEC 61000-4-13,2002
Electrostatic Discharge Immunity TestIEC 61000-4-2,2008
Radiated Susceptibility TestIEC 61000-4-3,2010
Electrical Fast Transient ImmunityIEC 61000-4-4,2012
High Energy Surge Immunity TestIEC 61000-4-5,2014
Conducted RF Immunity TestIEC 61000-4-6,2013
Power Frequency Magnetic Field TestIEC 61000-4-8,2009
Damped Oscillatory Sinusoidal Immunity TestIEC 61000-4-18,2011
Voltage Dips and Interruption Immunity Test
IEC 61000-4-11

*Feature Available only on Specific requests and suitable price points
*Output ports are customizable based on the requirements
*Product development is continuous process, subject to change without prior notice