GPS TIME SYNC SERVERT-GPS-300-EU-S27

OVERVIEW

Time synchronization creates a platform for an entire system comprising wide range of applications to operate in synchronous with time.

The demand for improving the effectiveness of any system in place is met with time synchronization system deployed in the field. Troubleshooting is simplified by the application of time syncing equipment’s in the event of fault analysis.

SERTEL manufactures GNSS/GPS based Time Synchronization System Equipment’s that generates precise time stamp signals that synchronizes various networks of electrical, computer, communications devices such as SCADA, DCS, IEDs, PLCs, LANs, Computer Buses, RTUs etc.

Key Features:

Redundancy in Receiver, Master Clock, Comparator and Power Supply sections.
Compact 1U size.
International Standard Euro Cards[Optional].
24 Channel GPS Receiver and 12 Channel Continuous Tracking.
Equipped with high precision OCXO crystal for frequency maintaining micro second level accuracy in case of non-availability of satellite signal.
Various output protocols such as PTP, NTP/SNTP, RS232, RS485, IRIGB
AM/TTL, BCD, PPH, PPM, PFC, Programmable pulse, DCF 77, etc.
LCD Display for visual information.
Highly customizable Output as per requirement.
Configured to work as Stand Alone Time server.
Universal Redundant Power Supply.
Output Integrated to 3 decimal of frequency in Hz.
Status indication through LEDs for various sections.
Low-cost maintenance with durable performance.
Have provision to Slave display units over long distance communication with differential pulse clocks

TECHNICAL SPECIFICATIONS
GPS ANTENNA
Model	T-GPA-014-S15
Receiving Frequency	L1- 1575.42 MHz L5- 1176 Mhz
Tracking code	‘L’ Band CA code
Geodetic System	WGS – 84
No. of Channels	24 Channel / Parallel
Type	Helical
Axial Ratio	<4 dB
Supply Voltage	+5V DC (Internal)
Gain	Over 40 dB
Noise Figure	Less than 0.5 dB
Operating Temp	-40 °C to +85 °C
Connector	BNC
Dimension	80(h)x55(d) x 82(w) mm
Mounting	Fixed (Roof mount) IP67 (Ingress Protection Rating)
GPS RECEIVER
Model	T-GPS-300-EU-S27
Interface	TTL (Normal High)
Input connector	BNC Connector
Output Rate	Every second
Power Supply	2x 90-260 V AC/DC
Display	Two 2x16 / 2x20 LCD
Type	GPS: L1 C/A, L2C, GLO: L1OF, L2OF, GAL: E1B/C BDS: B1I, B2I 184 Channel Parallel-tracking receivers
Frequency	L1 & L2
Sensitivity (Acquisition)	-148 dBm
Sensitivity (Tracking)	-167 dBm
Design	1U rack-mount bracket designed for 19 Inch Cabinets Fabricated Heatsinks
Protocol	NMEA, Sertel Format, Serial String ASCII format.
ENVIRONMENT
Storage Temperature	-40 to +85 °C
Operating Temperature	-10 to+55 °C
Humidity	0 – 95% RH, non-condensing
Power Drain	55W *Depends on Output configuration
Power Supplies	1x or 2x Power Supplies High Voltage - AC/DC 90-370 VDC 80-260 VAC Low Voltage - DC 24-60 VDC *Feature Available only on Specific requests and suitable price points
Ingress Protection	IP40
Configuration Software
Platform	HTTPS/SSL Browser-based configuration
MECHANICAL SPECIFICATION
Dimensions	1U(H) x 485(W) x 185(D) mm *Size Depends on number of outputs
Mounting	19” Rack
Weight	2 KGS
Oscillator Options *Feature Available only on Specific requests and suitable price points
Disciplined Oscillator	TBC*
Rubidium	TBC*
VCTCXO	TBC*
OCXO	TBC*
INPUT
GNSS Antenna inputs	L1Band GNSS, BNC [F]
Configuration	Sertel Time Management Suite for complete accessibility and configurability of server. Keypad for local configuration L1Band GNSS, BNC [F] *Feature Available only on Specific Requests and suitable price points
Input	DC IRIG-B Input (BNC)
Antenna Input	BNC 5V GNSS Input
Alarm Relay	3-Pin Form-C NO/NC alarm relay
OUTPUT VARIANTS*
1PPS	TTL, 50 Ω Impedance, BNC [F]
IRIG-B	AM [B125], 50 Ω Impedance Sine Wave, BNC [F] TTL [PWM
DCF77	TTL, 50 Ω Impedance, BNC [F]
Pulse Outputs	1 PPM/PPS/PPD/PPH/ Configurable
Display Outputs	Differential Pulse/ Serial/ IRIGB
Fiber Output PPS \| NTP \| IRIGB TTL	ST Fiber 62.5/125 µm, ʎ 820 nm
Programmable Output	TTL or Frequency Output (1.544, 2.048, 10MHz, Sine or Square) (BNC) TTL or AM IRIG-B Output (BNC) TTL Input/Output (BNC) ST Fiber (62.5/125 µm) multimode HV MOSFET 300V 1A (2-pin) Modbus RS485/TCPIP IEC60870-103/104
Ethernet Output	RJ45 - Time Protocols NTP, PTP
Ethernet Connections	RJ45 1GbE/Fast Ethernet SFP 1GbE`/Fast Ethernet *Feature Available only on Specific Requests and suitable price points
NETWORK TIME SERVER OPTION*
IEEE 1588v2 (PTP)	P2P/E2E delay 1-Step/2-Step delay C37.238:2011 Power Profile C37.238:2017 Power Profile ITU G.8265.1 Telecom Profile ITU G.8275.1 Telecom Profile IEEE 61850-9-3 Power Utility Profile
NTP/SNTP	Stratum 1 NTP & SNTP Time server Multicast & Broadcast capability
SNMP	V1, V2C & V3 support can be independently enabled Configurable V1, V2C community names & security groups Fully monitored via SNMP;
Protocols supported	ARP, UDP, ICMP, DHCP, SNMP, HTTPS, IPv4,IPv6
CLOCK ACCURACY TO UTC
TTL/Fiber:	< 100 ns
PTP Time Stamp	< 100 ns
Security	User-Defined Access Control Lists (ACL)
PRP	IEC 62439-3 (2016) Fast failover slave Supports up to two PRP pairs PTP (IEEE 1588v2) Default & Power Profiles
AM IRIG-B	< 100 ns
1 PPS	< 100 ns
NTP Timestamp at Server Source	< 1 μs (At client End Depends on Network Architecture for more accuracy)
Notifications *Feature Available only on Specific Requests and suitable price points	SNMP trap generation V1, V2C & V3 SNMPv3 traps can be authenticated Syslog (RFC-3164 & 5424 verities)
TEST AND STANDARDS
Dry Heat Test	IEC 60068-2-2
Cold Test	IEC 60068-2-1
Damp Heat (Steady State) Test	IEC 60068-2-3
Sinusoidal Vibration Test	IEC 60068-2-6
Dielectric Strength Test	IEC 60255-5-0
Pulse Magnetic Field Test	IEC 61000-4-9,2016
Radiated RF Power Disturbance	CISPR 14-1,2009
Voltage Fluctuation and Flicker Emission Test	IEC 61000-3-3,2013
Harmonics, Inter Harmonics and Low Frequency Immunity Test	IEC 61000-4-13,2002
Electrostatic Discharge Immunity Test	IEC 61000-4-2,2008
Radiated Susceptibility Test	IEC 61000-4-3,2010
Electrical Fast Transient Immunity	IEC 61000-4-4,2012
High Energy Surge Immunity Test	IEC 61000-4-5,2014
Conducted RF Immunity Test	IEC 61000-4-6,2013
Power Frequency Magnetic Field Test	IEC 61000-4-8,2009
Damped Oscillatory Sinusoidal Immunity Test	IEC 61000-4-18,2011
Voltage Dips and Interruption Immunity Test	IEC 61000-4-11
Feature Available only on Specific requests and suitable price points Output ports are customizable based on the requirements *Product development is continuous process, subject to change without prior notice

Sertel_T-GPS-300-EU-S27_Catalogue