Overview

Signal Conditioner converts one format of time signal to another time format with provision of providing many number of outputs for connecting to various number of Electrical and Instrumentation devices.

Multiple protocol variants such as IRIG-B (AM / TTL), RS 232, RS485, TCP/IP, NTP/SNTP,NTP/SNTP Over FO, IRIG-B – TTL over FO output, Differential pulse signals are generated as per quantity requirement. Each outputs are isolated.

Conversions such as RS 232 to RS485, RS 232 to TCP/IP, RS232 to Pulse, RS232 to SNTP/NTP, IRIG-B(TTL) to IRIG –B (AM), IRIG-B( AM) to IRIG-B(TTL), RS232 to NTP/SNTP– FO,

T-SC-300

KEY FEATURES:

  • Accepts Wide Range of External Input Sources 1PPS, IRIG-B [AM/TTL], RS232, RS485.
  • Multiple protocol outputs can be generated
  • Protocols generated from Signal Conditioner IRIG-B (AM / TTL), RS232, RS485, PTP, TCP/IP, NTP/SNTP, NTP/SNTP Over FO, IRIG-B –TTL over FO output.
  • Any combination of outputs can be generated with single input source
  • Multiple NTP/SNTP ports can be generated, Unique IP addresses can be assigned for each ports.
  • Equipped with high precision OCXO crystal maintaining better holdover and frequency level in case of non-availability of input source*.
  • Multiple Signal Conditioners can be placed at various plant locations with help of single GPS/GNSS receivers.
  • Highly customizable Output as per requirement and all ports are dedicated one.
  • Any number of outputs can be generated with help of multiplying signal conditioners.
  • 19” Rack Mount device varies from 1U,2U,3U based on output requirements
TECHNICAL SPECIFICATIONS 
GPS RECEIVER
ModelT-SC-300
InterfaceTTL (Normal High)
Input connectorBNC / Phoenix / DB-9
Output RateEvery second
Power Supply90-260 V AC/DC A & B
DisplayLED INDICATORS
Signal Input
Signal Output
Power Fail
Design1U/2U/3URack-mount bracket designed for 19 Inch
Cabinets
Fabricated Heatsinks
IP40 (Ingress Protection Rating)
Oscillator Options
RubidiumTBC*
VCTCXOTBC*
OCXOTBC*
MECHANICAL SPECIFICATION
DimensionsDimensions
MountingMounting
WeightWeight
ENVIRONMENT
Storage Temperature-40 to +85 C
Operating Temperature-10 to+55 C
Humidity0 – 95% RH, non-condensing
Power Drain60W max
Power Supplies1x or 2x Power Supplies
High Voltage - AC/DC
120-240 VDC
100-240 VAC
Low Voltage - DC
40-110 VDC
Ingress ProtectionIP40
Configuration Software
PlatformPlatform
INPUT
External Pulse SignalPhoenix /BNC [F]
External 1PPSTTL, BNC [F]
External IRIG-BTTL/AM, BNC [F]
External 10Mhz0 to 13dBm, BNC [F]
External RS232DB-9 [F]
External RS485DB-9 [F]
Configuration Web server Interface and Sertel Time Management Suite for complete accessibility and configurability of server.
SNMP for remote management only for NTP/SNTP
Ethernet ConnectionsRJ45 1GbE/Fast Ethernet
SFP 1GbE`/Fast Ethernet
Alarm Relay3-Pin Form-C NO/NC alarm relay
OUTPUT
1PPSTTL, 50 Ω Impedance, BNC [F]
IRIG-BAM [B125], BNC [F]
TTL BNC [F] / TTL-FO
10 MHz10dBm, ±1dBM, BNC [F]
Impedance50 Ω Sine Wave
RS232DB-9 [F] / Phoenix / Wago
RS485DB-9 [F] / Phoenix / Wago
NTP / SNTPRJ45 [Copper] / FO
T1/E1/J1 OutputRJ48 T1/E1/J1 Output
Fiber OutputST Fibre 62.5/125 µm, ʎ 820 nm
Programmable OutputTTL or Frequency Output (1.544,
2.048, 10MHz, Sine or Square) (BNC)
TTL or AM IRIG-B Output (BNC)
TTL Input/Output (BNC)
ST Fiber (62.5/125 µm) multimode
HV MOSFET 300V 1A (2-pin)
TEST AND STANDARDS
Dry Heat TestIEC 60068-2-2
Cold TestIEC 60068-2-1
Damp Heat (Steady State) TestIEC 60068-2-3
Sinusoidal Vibration TestIEC 60068-2-6
Dielectric Strength TestIEC 60255-5-0
Pulse Magnetic Field TestIEC 61000-4-9,2016
Radiated RF Power DisturbanceCISPR 14-1,2009
Voltage Fluctuation and Flicker Emission TestIEC 61000-3-3,2013
Harmonics, Inter Harmonics and Low
Frequency Immunity Test
IEC 61000-4-13,2002
Electrostatic Discharge Immunity TestIEC 61000-4-2,2008
Radiated Susceptibility TestIEC 61000-4-3,2010
Electrical Fast Transient Immunity IEC 61000-4-4,2012
High Energy Surge Immunity Test IEC 61000-4-5,2014
Conducted RF Immunity TestIEC 61000-4-6,2013
Power Frequency Magnetic Field TestIEC 61000-4-8,2009
Damped Oscillatory Sinusoidal Immunity Test
IEC 61000-4-18,2011
Voltage Dips and Interruption Immunity TestIEC 61000-4-11

*Feature Available only on Specific requests and suitable price points
*Output ports & Input Ports are customizable based on the requirements
*Product development is continuous process, subject to change without prior notice