OVERVIEW

Time synchronization creates a platform for an entire system comprising wide range of applications to operate in synchronous with time.

The demand for improving the effectiveness of any system in place is met with time synchronization system deployed in the field. Troubleshooting is simplified by the application of time synchronization in the event of fault analysis.

SERTEL manufactures GNSS/GPS based Time Synchronization System Equipment’s that generates precise time stamp signals that synchronizes various networks of electrical, computer, communications devices such as SCADA, DCS, IEDs, PLCs, LANs, Computer Buses, RTUs etc.

T-GPS-300-D18

Key Features:

  • Compact size. DIN Rail mountable.
  • 24 Channel GPS Receiver and 12 Channel Continuous Tracking.
  • Provides time/ date stamping through IRIG B (AM) & ETHERNET.
  • Low cost maintenance with durable performance.
  • Compiled with IP-V4/V6 Ethernet
  • Highly customizable Output as per requirement
  • Low-cost maintenance with durable performance.
  • Have provision to Slave display units over long distance communication with differential pulse clocks
TECHNICAL SPECIFICATIONS 
GPS ANTENNA
ModelT-GPA-014-S15
Receiving Frequency1575.42 MHz +/- 1 MHz
Tracking code ‘L’ Band CA code
Geodetic SystemWGS – 84
No. of Channels24 Channel / Parallel
TypeHelical
Axial Ratio<4 dB
Supply Voltage+5V DC (Internal)
GainOver 40 dB
Noise FigureLess than 1.5 dB
Operating Temp-40 °C to +85 °C
ConnectorBNC
Dimension80(h)x55(d) x 82(w) mm
MountingFixed (Roof mount)
GPS RECEIVER
ModelT-GPS-300-D18
InterfaceTTL (Normal High)
Input connectorBNC
Output RateEvery second
Power Supply24V/48V DC
90 to 260v AC&DC Operation
Display2 x 16 LCD small*
TypeGPS: L1 C/A, L2C,
GLO: L1OF, L2OF,
GAL: E1B/C
BDS: B1I, B2I
32 Channel Parallel-tracking
receiver
Frequency1575.42 Mhz
Sensitivity (Acquisition)-148 dBm
Sensitivity (Tracking)-167 dBm
MountDin Rail
Output ConnectorBNC & RJ45
OutputIRIG B (AM) & NTP/SNTP
Status IndicatorPower ON, Lock
ENVIRONMENT
Storage Temperature-40 to +85 °C
Operating Temperature-10 to+55 °C
Humidity0 – 95% RH, non-condensing
Power Drain45 w max
Power SuppliesL = 14 - 36 Vdc
M = 20 - 75 Vdc
H = 90 - 300 Vdc
Programmable output optionsIRIG-B (B00x / B22x) time code with selectable C37.118.1 and
AFNOR S87-500 extensions.
DCF77 time code 1 kHz square wave User defined pulse sequences:
−1PPS/PPM/PPD/PPPH
− Offsets and durations from 10 ms to 24 hours
MECHANICAL SPECIFICATION
Dimensions(W) 72 mm x (D) 60 mm x (H) 90
mm
MountingDin Rail
Weight1.5 KG
Programmability
PlatformWindows based configuration
software
INPUT

*Feature Available only on Specific requests and suitable price points

GNSS Antenna inputsL1Band GNSS, BNC [F]
Ethernet ConnectionsRJ45 1GbE/Fast Ethernet
SFP 1GbE`/Fast Ethernet

*Feature Available only on Specific Requests and suitable price points

InputGNSS Signal [BNC]
Antenna InputBNC 5V GNSS Input
Alarm Relay3-Pin Form-C NO/NC
alarm relay*
OUTPUT

*Feature Available only on Specific requests and suitable price points

1PPSTTL, 50 Ω Impedance, BNC [F]
IRIG-BAM [B125], BNC [F]
Impedance50 Ω Sine Wave
NETWORK TIME SERVER OPTION
NTP/SNTPStratum-1 NTP & SNTP time server
Protocols supportedARP, UDP, ICMP
TEST AND STANDARDS
Dry Heat TestIEC 60068-2-2
Cold TestIEC 60068-2-1
Damp Heat (Steady State) TestIEC 60068-2-3
Sinusoidal Vibration Test IEC 60068-2-6
Dielectric Strength TestIEC 60255-5-0
Pulse Magnetic Field TestIEC 61000-4-9,2016
Radiated RF Power DisturbanceCISPR 14-1,2009
Voltage Fluctuation and Flicker Emission Test
IEC 61000-3-3,2013
Harmonics, Inter Harmonics and Low Frequency Immunity TestIEC 61000-4-13,2002
Electrostatic Discharge Immunity TestIEC 61000-4-2,2008
Radiated Susceptibility TestIEC 61000-4-3,2010
Electrical Fast Transient ImmunityIEC 61000-4-4,2012
High Energy Surge Immunity TestIEC 61000-4-5,2014
Conducted RF Immunity Test IEC 61000-4-6,2013
Power Frequency Magnetic Field TestIEC 61000-4-8,2009
Damped Oscillatory Sinusoidal Immunity Test
IEC 61000-4-18,2011
Voltage Dips and Interruption Immunity TestIEC 61000-4-11

*Feature Available only on Specific Requests and suitable price points
*Output ports are customizable based on the requirements
*Product development is continuous process, subject to change without prior notice